sledge_hammer
02-27 05:57 PM
It is evident to anyone following this thread who hijacked it. I was only responding to the OP when you came here with your crappy comments about how people should not enforce personal morals on drug traffickers.
Why don't you explain to everyone how is telling the OP that we do not condone taking or selling drugs something of a personal opinion?
If your next post does not address the issue, then we all know who the real immature person is. Unless you have an answer, I will consider this case closed.
Again, you're the one whose hijacked the thread with your verbal mastur*tion.
LMAO@ "if you consider yourself tough" hahaha
so fighting anonymously over the internet in a forum is your test of being "tough" ?
haha.
Go back and do your IT coding or whatever you do.
I shall reiterate what i stated in my previous post and leave the childish internet bickering to you Mr internet "Sledgehammer" LOL
Why don't you explain to everyone how is telling the OP that we do not condone taking or selling drugs something of a personal opinion?
If your next post does not address the issue, then we all know who the real immature person is. Unless you have an answer, I will consider this case closed.
Again, you're the one whose hijacked the thread with your verbal mastur*tion.
LMAO@ "if you consider yourself tough" hahaha
so fighting anonymously over the internet in a forum is your test of being "tough" ?
haha.
Go back and do your IT coding or whatever you do.
I shall reiterate what i stated in my previous post and leave the childish internet bickering to you Mr internet "Sledgehammer" LOL
wallpaper Nicki Minaj has revealed that
singhsa3
12-28 10:41 AM
I am but with an approved I-140
See http://immigrationvoice.org/forum/showthread.php?t=16245&highlight=independence
See http://immigrationvoice.org/forum/showthread.php?t=16245&highlight=independence
gapala
07-20 04:53 PM
Thanks friend. I do hope your prayers work for me. But I still find it strange that if someone has a pending I-485 through consular processing route, then he/she can't get a visitor visa no matter what? What if it is a medical crisis? Family reunion issues? This sure sucks. I will check with some lawyer on this.
And lastly what you detect as arrogance is my plain talking style. Did I make personal attack on anyone? no, right? Life is like a game of chess. Make the move which makes the best sense at any stage. What is the point in thinking about past moves?
I do respect your views and To me, life is little more "serious business and it deserves due respect than entertainment aspect of a game" :) I hope you would respect other's views on life too.
And lastly what you detect as arrogance is my plain talking style. Did I make personal attack on anyone? no, right? Life is like a game of chess. Make the move which makes the best sense at any stage. What is the point in thinking about past moves?
I do respect your views and To me, life is little more "serious business and it deserves due respect than entertainment aspect of a game" :) I hope you would respect other's views on life too.
2011 2011; pink track list pink
gk_2000
08-02 01:26 PM
well this is your time. with eb3 row 2009, you probably are in wait for at least 5 years. Anyway the point is, no country would be stupid enough to stop great talent from coming through to satisfy it's diversity policy. When you are talking about 0.14 million immigrants for a nation of 300 million, that's less than 0.05%. So please take your diversity argument with you and don't let the door hit you on your way out. For this miniscule percentage, the US will lose out on thousands of the best Indian and Chinese engineering/science talent. US's loss, India/China's gain. If this is not an example of an extremely stupid strategic policy then I'm not sure what is.
Oh and by the way, may not be me or you waiting for Indian/Chinese GC's but could be your kid and mine. Let's have this talk again in a decade or two given GDP growth,debt and deficits of US and GDP growths/deficits/market size of India/China.
tanu, do you realize that the above is nothing but a rant? isantem is not responsible for making the rules so why beat him up? What he said is nothing but the facts to the best of his knowledge
Yes, go ahead, give me reds. From your behavior I feel you may be one of those immature types who will red anyone who disagrees..
Oh and by the way, may not be me or you waiting for Indian/Chinese GC's but could be your kid and mine. Let's have this talk again in a decade or two given GDP growth,debt and deficits of US and GDP growths/deficits/market size of India/China.
tanu, do you realize that the above is nothing but a rant? isantem is not responsible for making the rules so why beat him up? What he said is nothing but the facts to the best of his knowledge
Yes, go ahead, give me reds. From your behavior I feel you may be one of those immature types who will red anyone who disagrees..
more...
actaccord
01-31 08:56 AM
to find anything related to the patent in uspto.gov
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
Ms Su of TVU....why would someone stoop so low and looks like she became a convenient scapegoat for the students ..? not sure what'd you think. She has a Phd from UC Berkley and a patent on her name ....several publications.
I dug up her resume...
Dr. Susan Xiao-Ping Su
President of Tri-Valley University
Tri-Valley University TVU (http://trivalleyuniversity.org)
E-mail: ssu@trivalleyuniversity.org, su123@sbcglobal.net
EDUCATION
Ph .D. Department of Mechanical Engineering, University of California at Berkeley, 2001.
Major: Design; Minor I: Microscale Heat Transfer; Minor II: Integrated Circuit Technology.
Dissertation: Compliant Microleverage Mechanism Design for MEMS Application
Dissertation Advisors: Prof. Alice M. Agogino; Prof. Tsu-Jae King, Prof. Dennise K. Lieu
M. S. Department of Mechanical and Aeronautical Engineering, University of California at Davis, 1997. Major: Design
Thesis: Computer-Aided Kinematic and Dynamic Analysis of Spatial Mechanisms
Thesis Advisors: Prof. Harry H. Cheng; Prof. Bahram Ravani; Prof. An T. Yang (Emeritus)
B. S. Department of Engineering Mechanics, Tsinghua University, China, 1991.
Major Field of Study: Fluid Mechanics
WORK EXPERIENCE
1. President and Founder, Semiconductor System Integration, Pleasanton, 2003-present
� Consultant for Phosistor Technology, Pleasanton, on Semiconductor Device Fabrication, Development of photonic component (laser and OPM) process, Oxford Plasmalab DRIE and ICP etching of SiO2 for Optical MEMS devices.
� Consultant for California Micro Device on Chip-Scale-Packaging strengthen mechanism;
� Consultant for NASA on nano chemical sensor fabrication.
� High-density Magnetic Random Access Memory Development
2. Lecturer, HerGuan University, Sunnyvale, 2007
EE537 Analog IC Design, EE515 & 516 VLSI I & II
3. Lecturer, San Jose State University, San Jose, CA, Fall 2004-2006
EE178 Digital System Design with FPGA, ME 101 Dynamic
4. Lecturer, San Francisco State University, San Francisco, CA, 2004-2005;
ENGR 890 Design of MEMS; Design of CMOS Memory Circuit
ENGR 356 Computer Architecture; ENGR378 Digital System Design with Verilog.
5. Lecturer, International Technological University, Santa Clara, CA, 2004-2007
EEN967 Analog IC Design; EE 519 CMOS Memory Circuit Design; EE 511 VlSI I, II;
EEN 923 & 910 Semiconductor Physics & Devices; EEN 918 IC Fabrication Technology.
6. Lecturer, Northwestern Polytechnic University, Fremont, CA, 9/2002 -2004
EE 507 Analog IC Design; EE 520 CMOS Memory Circuit Design;
EE 506 VLSI II; EE 624 IC Fabrication Technology; EE 581 MEMS/NEMS Design;
Developing MEMS and nanotechnology concentration area curriculum.
7. Member of Technical Staff, Project manager, PicoNetics Inc., Fremont, 9/2000-9/2002.
� 256K 100MHz (TSMC 0.25m) and 4M 200MHz SRAM design (0.13m G logic process); RLC circuit for on-chip sin wave generation, sense amplifier fro SRAM, DRAM, Bandgap reference, voltage regulator, PLL circuit design, standard cell library design.
� Supervision of two layout engineers for a 256K SRAM circuit including all technical file set-up, layout optimization for minimum coupling and RC delay, Dracula LVS and Arcadia extraction, LVS and Extraction tools evaluation and memory compliers; UMC and TSMC 0.25, 0.18, 0.15 and 0.13 m process evaluation for SRAM.
8. Graduate Researcher, Berkeley Sensor and Actuator Center (BSAC), and Berkeley Expert Technology System Lab (BEST), U. C. Berkeley, 1996-2000.
� Design, fabrication and testing of a resonant accelerometer (RXL) with on-chip amplifier and two-stage leverage mechanism by the SOI-MEMS integrated process.
� Compliant micro-leverage mechanism design and analysis, FEM analysis and simulation with ABAQUS and SUGAR; Design of the mechanism for force and displacement amplification in other MEMS devices including a micro-valve, an electrostatic actuator and the suspension of the disk drive.
9. Internship, Lawrence Berkeley National Lab, EETD, 6/1999-12/1999.
� Optics programming; SEM and TEM measurements of glass samples.
10. Graduate Researcher, Integrated Engineering and Mechatronics Lab, Dept. of Mechanical and Aeronautical Engineering, UC Davis, 1994-1996
� With Ch program, analysis of velocity and acceleration for 32 spatial mechanisms (4-bar, 5-bar, 6-bar and 7-bar); force and torque analysis of RCCC & RCRCR mechanisms;
� Designed a data acquisition system for PAS machine by communication of an AT-MIO-16F board in Labview.
GRADUATE THESIS ADVISING:
� Yaosong Tao, International Technological University, Ph.D. Thesis: RF MEMS Components for Communication Systems, 2004.
� Leo Huang, Northwestern Polytechnic University, M.S. Thesis, Contacting Printing Lithography for Polymeric Organic Light-Emitting Diode, 2005;
� Sam Shi, International Technological University, M.S. Thesis, A 8-bit Energy Recover Adder, 2005;
� Parthiv Pandya, International Technological University, M.S. Thesis: MRAM Core Cell Design and Optimization, 2004;
� Paisit Sriprataks, International Technological University, M.S. Thesis: MRAM Sensing Circuit Design, 2004;
� Balajee Premraj, International Technological University, M.S. Thesis: Design of an 8M MRAM, 2004;
� Raul Gali, Northwestern Polytechnic University, M.S. Thesis: Signal Process Circuit Design for a Resonant Accelerometer, 2003;
AWARDS and HONORS
� John H. Latoures Scholarship, Mechanical Engineering Department,U.C. Berkeley, 2001.
� Lankershim Awards, U.C. Berkeley, 2000
� National Science Foundation (NSF) Graduate Research Fellowship (1996-1999);
� American Associated University Woman (AAUW) Selected Professional Fellowship ,1995;
� University Fee Grant, UC Davis, 1994.
PUBLICATIONS
1. S. X. P. Su, H. S. Yang, Alice M Agogino, Resonant Accelerometer with a Two-Stage Microleverage Mechanism Fabricated by SOI-MEMS Technology, IEEE Sensors Journal, Vol.5, No.6 December 2005, p.1214-1223
2. An Sang Hou, Susan X. P. Su, Design of a Capacitive-Sensor Signal Processing System with High Accuracy and Short Conversion Time, Sensors and Actuators A: Physical, Volume 119, Issue 1, 28 March 2005, P.113-119
3. X-P S. Su, H. S. Yang, Analytical Modeling and FEM Simulation of Single-Stage Microleverage Mechanism, International Journal of Mechanical Sciences 44, 2217-2238, 2002.
4. X-P. S. Su, H. S. Yang, Two-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 22, 328-336, 2002.
5. X-P S. Su, H. S. Yang, Design of Compliant Microleverage Mechanism, Sensors and Actuators, A 87 146-156, 2001.
6. X-P S. Su, H. S. Yang, Single-Stage Microleverage Mechanism Optimization in a Resonant Accelerometer, Structural and Multidisciplinary Optimization 21, 246-252, 2001
7. H. S. Yang, X-P S. Su and B. Bai, Strain Analysis in Uniaxial Tensile and Compression Testing of Anisotropic Materials, International Journal of Mechanical Sciences 42 (2000) 2395-2415.
PATENTS
1. Susan X. P. Su, �A Folded-MTJ MRAM Cell� U.S. Patent No. US60/994941, 2007
gc_maine2
08-05 12:12 PM
its a really good discussion, thanks to all people who have provided valuable information. I am a Consultant throughout my career and never lead a team but now planning to change gears and move into project management. When I goolged about the requirement to take the exam, Lot of PMP training institutes came up and they are charging about $2000 for training and they say its a 5 day course, guarantee to pass bhla bhla .... My first question is it required to take these training classes? if not how to become eligible for to take the exam, Please advice.
more...
alterego
09-15 01:39 PM
Hey, this sounds sig-worthy... can I use that for my sig?
Did you come to america for Horizontal growth...................ie to increase your girth?
You could easily do that in india these days. Some comments here are plain funny!
Did you come to america for Horizontal growth...................ie to increase your girth?
You could easily do that in india these days. Some comments here are plain funny!
2010 Amos Lee releases new album,
FinalGC
01-05 11:54 AM
2) Job security for PMP's. The only job that will not be outsourced to India or China is that of a project manager.
Wrong !! I work for IBM and IBM just recently outsourced almost all the PM's and SDM's job to India only ( Not to China because of English speaking ability ). IBM got tonnes of skilled MBA's with english speaking. As of now hardly I see any PM's from US during calls. But I admire you for all the other points. well said.
Dear vine93:
Your statement may be an unique case in one IBM project. I was a PMO overseeing a large IBM implementation project and all my peers at IBM had PMP's. However, for implementation projects MBA's are never considered better than PMP's, however they are at par. MBA with PMP is a unique combination and it will help your career growth. Yes i too have a MBA with PMP.
However, you said one important aspect of a Project manager, i.e. communication. The PM needs to have a good command over English communication, both speaking and writing, otherwise life will be a struggle. Many of the Indian, Chinese, Korean and other people from Asian countries have a very strong accent with their English communication....which can become a hinderance in getting the top job. Also note that a PMP will get a job if he is technically qualified and has a PMP, however for the top jobs your soft skills like communication, people skills and networking takes precedence.
Wrong !! I work for IBM and IBM just recently outsourced almost all the PM's and SDM's job to India only ( Not to China because of English speaking ability ). IBM got tonnes of skilled MBA's with english speaking. As of now hardly I see any PM's from US during calls. But I admire you for all the other points. well said.
Dear vine93:
Your statement may be an unique case in one IBM project. I was a PMO overseeing a large IBM implementation project and all my peers at IBM had PMP's. However, for implementation projects MBA's are never considered better than PMP's, however they are at par. MBA with PMP is a unique combination and it will help your career growth. Yes i too have a MBA with PMP.
However, you said one important aspect of a Project manager, i.e. communication. The PM needs to have a good command over English communication, both speaking and writing, otherwise life will be a struggle. Many of the Indian, Chinese, Korean and other people from Asian countries have a very strong accent with their English communication....which can become a hinderance in getting the top job. Also note that a PMP will get a job if he is technically qualified and has a PMP, however for the top jobs your soft skills like communication, people skills and networking takes precedence.
more...
jsb
01-05 03:00 PM
So jsb if congressman and Ombudsman doesnt work either is there anything which will work ? Can one actually go physically to the Service Center and ask to speak to the PRO (Public relations officer) or something ?
I have heard on this forum someone doing that, i.e. flying to Texas and asking to meet those who matter. Initially they did not entertain him, but eventually he succeeded. It costs nothing trying via the Ombudsman route, may be a bit if a hassle via the Congressman route. You should try both. Mention your situation, clearly bringing out the anomally. Ask if you are cleared on all fronts and your PD is current what is holding up. It might work....Best of luck.
I have heard on this forum someone doing that, i.e. flying to Texas and asking to meet those who matter. Initially they did not entertain him, but eventually he succeeded. It costs nothing trying via the Ombudsman route, may be a bit if a hassle via the Congressman route. You should try both. Mention your situation, clearly bringing out the anomally. Ask if you are cleared on all fronts and your PD is current what is holding up. It might work....Best of luck.
hair Nicki Minaj image gallery
CADude
01-05 05:22 PM
Please try. If nothing works out (like me) still you have satisfaction you did your part. :)
more...
munnu77
04-18 08:22 AM
what is BEC?
Backlog Elimination centre
Backlog Elimination centre
hot Download Nicki Minaj Roman#39;s
anil_gc
09-26 08:04 AM
as per the certificate you completed the degree in June 2002 and you don't have five years from that date so it is tough now, filing for EB3 was a good option.
Talk to the lawyer and see they can correct it at this stage
Talk to the lawyer and see they can correct it at this stage
more...
house May 24, 2011 · Keyshia Cole
shamu
01-10 11:16 AM
Shamu
Hospitals will NOT provide medical insurance. They can provide financial assistance based on your income if you do qualify. Usually it is a payment plan after some discounts on the total cost of the care provided.
Secondly if you are looking for maternity coverage after getting pregnant the premiums are going to be high, and mostly the insurance companies deny coverage.
Thirdly i would check with your local medicaid office which on occasion do provide emergency maternity coverage even for legal immigrants in some states.
Medicaid, I believe I don't quality because of my pay.
I am looking for some payment options from Hospitals which take care from prenatal to Delivery. I have individual insurance but, that would not cover maternity insurance. In Texas you would not get individual insurance with maternity.
But I have learn't that when you have individual insurance would cover all complications of delivery, including new born baby, but not regular delivery charges.
I hope some one on this forum would have some good information which would be helpful to me.
Any one reading this post, please provide your suggestions or ideas. That would be really helpful.
Thanking in advance.
Hospitals will NOT provide medical insurance. They can provide financial assistance based on your income if you do qualify. Usually it is a payment plan after some discounts on the total cost of the care provided.
Secondly if you are looking for maternity coverage after getting pregnant the premiums are going to be high, and mostly the insurance companies deny coverage.
Thirdly i would check with your local medicaid office which on occasion do provide emergency maternity coverage even for legal immigrants in some states.
Medicaid, I believe I don't quality because of my pay.
I am looking for some payment options from Hospitals which take care from prenatal to Delivery. I have individual insurance but, that would not cover maternity insurance. In Texas you would not get individual insurance with maternity.
But I have learn't that when you have individual insurance would cover all complications of delivery, including new born baby, but not regular delivery charges.
I hope some one on this forum would have some good information which would be helpful to me.
Any one reading this post, please provide your suggestions or ideas. That would be really helpful.
Thanking in advance.
tattoo May 3rd, 2011 Posted 11:05 am
satishku_2000
12-01 03:14 PM
There may be a slight decrease in number because of retrogression, but i believe the bros&sis in the citizenship queue will compensate for that.
Naturalization queue is much bigger than AOS queue now and it has political clout. I guess probably thats the reason why they are expediting the namecheck now. USCIS dont want to be dragged into voter suppression mess.:)
Naturalization queue is much bigger than AOS queue now and it has political clout. I guess probably thats the reason why they are expediting the namecheck now. USCIS dont want to be dragged into voter suppression mess.:)
more...
pictures New Ludacris featuring Trey
Roger Binny
05-29 09:37 PM
+1 one from me, why can't we pass this to all US friends as a forward?
dresses Photo of Nicki Minaj at album
GCA
05-15 01:39 PM
That was a great post from "snathan" and a very touching one as well. Thanks dude.
I see few comments saying otherwise and even pushing "snathan" to pull back his original post. But the way I see it, "snathan" never adviced or forced it on anyone. There are always good and bad things everywhere and upto the matured minds to see what to take and what not to. But to deprive someone of that piece of advice or information or a story for that matter, is what I would term it bad.
Well, if this arrived too late for someones current relation, it should definitely help the next one. After all life doesn't end until the last breath.
Also thanks to Mbhai too. Though meant to criticize, still had the "snathan" posting in quotes. Otherwise many like me wouldn't have had the chance to read his post. Again I am not saying Mbhai and rest others who criticized did anything wrong. They again free to share there opinion but could have avoided pointing directly to someone ( no harm ). All here are matured enought to see whats good/bad and what to take/not.
No harm intended against anyone in this post. Take it all easy guys.
I see few comments saying otherwise and even pushing "snathan" to pull back his original post. But the way I see it, "snathan" never adviced or forced it on anyone. There are always good and bad things everywhere and upto the matured minds to see what to take and what not to. But to deprive someone of that piece of advice or information or a story for that matter, is what I would term it bad.
Well, if this arrived too late for someones current relation, it should definitely help the next one. After all life doesn't end until the last breath.
Also thanks to Mbhai too. Though meant to criticize, still had the "snathan" posting in quotes. Otherwise many like me wouldn't have had the chance to read his post. Again I am not saying Mbhai and rest others who criticized did anything wrong. They again free to share there opinion but could have avoided pointing directly to someone ( no harm ). All here are matured enought to see whats good/bad and what to take/not.
No harm intended against anyone in this post. Take it all easy guys.
more...
makeup NEW MUSIC: @NickiMinaj “So
apahilaj
11-27 07:15 PM
Hi All FP seekers! I do not know what exactly I am missing if there is a delay in FP. It looks like hundreds of IV members are too much worried because of the 'delay' in FP. Let me worry too (by knowing the big problem!). Can any worriers explain??
On the other hand is it not better to have a late FP, so that you need not go again in the next 15 months! Anyway for most people GC is going to take years!
It's the uncertainty of the entire process that kills us...Have seen couple of users whose cases have been erroneoulsy denied since they did not went for their biometrics. Guess what, these users never received any FP notice from USCIS. I tend to partially agree with you; if the PD is no where close to being current, why worry about FP now - it's their responsibility to get us finger printed. But on the other hand, I do not want my case to be erroneously denied because of an error in their processing...
This is just my personal opinion. I am not loosing my sleep over this any more.
On the other hand is it not better to have a late FP, so that you need not go again in the next 15 months! Anyway for most people GC is going to take years!
It's the uncertainty of the entire process that kills us...Have seen couple of users whose cases have been erroneoulsy denied since they did not went for their biometrics. Guess what, these users never received any FP notice from USCIS. I tend to partially agree with you; if the PD is no where close to being current, why worry about FP now - it's their responsibility to get us finger printed. But on the other hand, I do not want my case to be erroneously denied because of an error in their processing...
This is just my personal opinion. I am not loosing my sleep over this any more.
girlfriend Read the full Nicki Minaj
ufo2002
09-15 01:53 PM
Did you come to america for Horizontal growth...................ie to increase your girth?
You could easily do that in india these days. Some comments here are plain funny!
India has a lot of people with wide girths? All the images I see of India shows pretty skinny people. Or maybe I was looking at pics of Ethiopians....
You could easily do that in india these days. Some comments here are plain funny!
India has a lot of people with wide girths? All the images I see of India shows pretty skinny people. Or maybe I was looking at pics of Ethiopians....
hairstyles Nicki Minaj
vrbest
08-25 10:44 AM
NSC: July 3nd 2008
FP : Aug 1, 2008
LUD on AUG 3, 2008
Still pending approval..
What a weird system - even for E-Filing (supposed to be online system- easy to organize), we see random approvals. Hope someone realizes and makes the system organized better...
FP : Aug 1, 2008
LUD on AUG 3, 2008
Still pending approval..
What a weird system - even for E-Filing (supposed to be online system- easy to organize), we see random approvals. Hope someone realizes and makes the system organized better...
GodBlessYou
04-01 07:17 PM
god_bless_you
I am not sure what the issue is with your account. I know Siva has been really busy. Can you, as a quick fix, create a new account and fax from that?
Thanks
OK Done !! sent two faxes!!
I am not sure what the issue is with your account. I know Siva has been really busy. Can you, as a quick fix, create a new account and fax from that?
Thanks
OK Done !! sent two faxes!!
Kitiara
02-11 05:02 AM
how come we have more votes than posters? Maybe some people prefer to just vote and not post a reason as to their preference?
0 comments:
Post a Comment